任意位姿物体机器视觉测量视差变形补正
DOI:
作者:
作者单位:

1.上海大学机电工程与自动化学院上海200072;2.常州工学院机械与车辆工程学院常州213032

作者简介:

通讯作者:

中图分类号:

TP391.4TH161

基金项目:

国家自然科学基金(61673252)、江苏省高校自然科学研究基金(16KJB520002)项目资助


Parallax deformation correction of machine visual measurement to arbitrary position pose objects
Author:
Affiliation:

1.School of Mechatronical Engineering and Automation, Shanghai University, Shanghai 200072, China;2.School of Mechanical and Vehicle Engineering, Changzhou Institute of Technology, Changzhou 213032, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    提出一种对机器视觉测量视场内任意位姿目标物体视差变形导致测量误差进行物体自动跟踪和变形补正的方法。在分析视差变形基础上,提出自动跟踪检测模型,得出补正参数。通过改进的序贯相似性检测算法(SSDA)模板匹配、图像的二值化处理和腐蚀、质心坐标求取和轮廓边缘搜索等计算,计算出反映目标物体位置、姿态偏移的特征参数,从而求得目标物体自动跟踪位置、姿态偏移补正量。以任意位姿M4螺母内螺纹检测为实验对象,实验结果表明,该自动跟踪补正方法可行,具有较好的跟踪一致性,取得了较好的视差变形补正效果。

    Abstract:

    A method is introduced for automatic tracking and deformation correction of the measurement error, caused by the parallax deformation of the target object in any position of the visual field. Based on the analysis of parallax deformation, an automatic tracking detection model is proposed to obtain the correction parameters. Through the improvement of SSDA template matching, image binarization and corrosion, centroid coordinate acquisition and contour edge search, the characteristic parameters reflecting the position and pose deviation of the target object are calculated. Thus, the object automatic tracking position and pose deviation correction amount can be obtained. In this paper, the internal thread of arbitrary position pose M4 nut is used as the experimental object. The experimental results show that the automatic tracking correction method is feasible and has good tracking consistency, and achieves better correction effect of parallax distortion.

    参考文献
    相似文献
    引证文献
引用本文

张亚锋,屠大维,蔡建文,干为民.任意位姿物体机器视觉测量视差变形补正[J].仪器仪表学报,2017,38(8):2030-2038

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-09-04
  • 出版日期: