超临界锅炉热量信号构造研究
DOI:
CSTR:
作者:
作者单位:

华北电力大学能源动力与机械工程学院保定071003

作者简介:

通讯作者:

中图分类号:

TH17

基金项目:

河北省教育厅科学研究指导性项目(z2012011)资助


Study on construction of heat release signal for supercritical boiler
Author:
Affiliation:

School of Energy Power and Mechanical Engineering, North China Electric Power University, Baoding 071003, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    提出一种超临界锅炉热量信号的构造方法,实现了对入炉燃煤发热量的准确测量。采用热力学性质标准IAPWSIF97对超临界锅炉水冷壁进行分区,解决了超临界工况下水冷壁内工质状态变化的难判断问题,对锅炉的蓄热系数进行了详细计算。根据某1 000 MW机组的结构参数和实际运行数据,对构造的热量信号进行验证。结果显示,该热量信号能够在快速响应机组负荷变化的同时准确地反映入炉燃煤发热量的变化,为超临界机组直接能量平衡协调控制系统设计打下基础。

    Abstract:

    The construction method of the heat release signal of a supercritical boiler is proposed, which can accurately measure the calorific value of coal in the furnace. The thermodynamic property standard, IAPWSIF97 is adopted to partition the supercritical boiler water cooled wall, which solves the difficult problem of judging the working fluid state within the water cooled wall under supercritical condition; and the boiler heat storage coefficient is calculated in detail. According to the structure parameters and actual operation data of a certain 1000MW unit,the heat release signal of the structure was verified. The results show that the heat release signal can rapidly response to the unit load change, at the same time accurately reflect the changes of the calorific value of coal in the furnace, which lays a foundation for the design of the direct energy balance coordinated control system of supercritical units.

    参考文献
    相似文献
    引证文献
引用本文

谷俊杰,白智中,王鹏,张岩.超临界锅炉热量信号构造研究[J].仪器仪表学报,2017,38(2):497-504

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-07-20
  • 出版日期:
文章二维码